Specification
| Model |
D300 |
D600 |
D1000 |
D1500 |
D2000 |
D3000 |
D4000 |
| Input Rated Voltage |
12VDC, 24VDC |
12VDC, 24VDC, 48VDC |
| Input Voltage Range |
10.5~15.0VDC, 21.0~30.0VDC |
10.5~15.0VDC, 21.0~30.0VDC, 42.0~60VDC |
| Output Voltage |
110VAC/120VAC, 220VAC/230VAC |
110VAC/120VAC, 220VAC/230VAC |
| Output Wave |
Pure Sine Wave |
| Output Frequency |
50/60Hz ±3% |
| Ouput Continuous Power |
300W |
600W |
1000W |
1500W |
2000W |
3000W |
4000W |
| Max. Output Power 1 hours |
350W |
650W |
1200W |
1600W |
2200W |
3200W |
4200W |
| Max. Surge Power |
600W |
1200W |
2000W |
3000W |
4000W |
6000W |
8000W |
| Distortion THD |
<3% (resistive road) |
| Peak Efficiency |
12V/24V 90%, 48V 92% |
| Max. USB Output(Optional) |
5V, 1A~2.4A |
| No-load consumption |
0.6A |
0.7A |
0.8A |
0.9A |
0.9A |
0.9A |
1.0A |
| Low Voltage alarm |
10.5V±0.3V (12V), 21V±0.6V (24V), 42V±1.2V (48V) |
| Low voltage shutdown |
10V±0.3V (12V), 20V±0.6V (24V), 40V±1.2V |
| Overload |
Output Shutdown, Red indicator alarms |
| Over voltage |
15.5V±0.3V (12V), 31V±0.3V (24V), 62V±0.3V (48V) |
| Over temperauture |
Output shutdown (internal>90ºC), automatically recover after temperature goes down |
| Short circuit |
Output shutdown, Red indicator alarms, restart to recover (Optional) |
| Reverse polarity |
Fuse burnt |
| Working Temperature |
'-40ºC~50ºC |
| Other |
Remote control default 5m wire/wireless (Optional) |
| Warranty |
24 month |
| Certification |
CE-EMC, CE-LVD, RoSH, FCC, TEST REPORT |
Main Features and Protection
1, Under-Voltage Protection(Batteries Using Life Protection): When the voltage of the batteries drops to the setting under-voltage point, the buzzer will be on, and the power will be off automatically in one minute, then the red light flashes
2, When the input voltage is higher than the overvoltage set point of the machine, the machine immediately shut down, and then red light flashes.
3, Short-Circuit Protection: When the output short-circuit phenomenon exists, the machine shut down immediately, then the red lights starts flashing.(Note: Output short-circuit will cause great harm and affect the life seriously, or even damage the machine.)
4, Over-load Protection: This machine overload protection with delay to meet some of the impact of higher current loads(such as motors, incandescent) When the load greater than output power, stopped by the degree of time delay 1-10 seconds, then the red light flashes.
5, Over-heated Protection: When the temperature reaches 40 degree the fan will be turned on automatically; when the temperature reaches (exceeds) 60 degree, the buzzer will be on and the power will be off in one minute, when the temperature exceeds 75 degree the power will be turned off at once, red light flashes.
){kind=link}