156.75*156.75 158*158 166*166 Solar Cell Wafer Solar Cell A Grade Hjt/Hit N Type Bifacial 5bb 9bb Monocrystalline

• Customization: Available
• Warranty: 25 Years
• Number of Cells: 1
• Application: Solar Panel
• Condition: New
• Certification: ISO, CE
• Material: Monocrystalline Silicon
• Type: Mono Perc, Mwt, IBC, Hjt, Hbc
• Grade: a
• Efficiency: 22.0%
• Cell Efficiency: 22.90%
• Product Name: Solar Cells 9bb Mono
• Continuous Solar: Dark Blue
• High Efficiency Solar Cell Busbar: 9bb
• 6*6 Solar Cell Power Watt: 5.51W
• 158.75mm Solar Cell: 300K PCS Stock
• Back(+): 1.25mm Bus Bars(Silver)Blue Anti-Reflecting
• Thickness: 180um±18um
• 5bb Solar Cell Material: Monocrystalline Silicon
• Transport Package: 1200PCS/Carton
• Specification: FSC-156-M02
• Trademark: Flagsun
• Origin: China
• HS Code: 8541402000
• Production Capacity: 300MW/Year
• Package Size: 156.00cm * 156.00cm * 1.00cm
• Package Gross Weight: 0.100kg

Product Description

Product Description

 

BASIC INFORMATION
Size	58.75mm*158.75mm±0.25mm	TkVoltage:-0.36 %/K
Thickness	190±30	TkCurrent:+0.07%/K
Front(-)	9*0.1mm bus bars (silver),Blue anti-reflecting coating, 114 vice busbar	TkPower:-0.38%/K
Back(+)	1.8mm wide soldering pads(silver) Back surface field (Aluminuim)	Rsh≥30Ω,Irev2≤0.8A

Mechanical Data and Design

Model	Efficiency	Max power Pmp (W)	Peak voltage Vmp (V)	Peak current Imp (A)	Open circuit voltage VOC (V)	Short-circuit current Isc (A)	Foll factor FF (%)
FS-158M-222	22.2	5.59	0.578	9.777	0.682	10.324	79.86
FS-158M-221	22.1	5.57	0.577	9.757	0.681	10.307	79.83
FS-158M-220	22.0	5.54	0.576	9.740	0.680	10.294	79.75
FS-158M-219	21.9	5.52	0.574	9.725	0.679	10.281	79.69
FS-158M-218	21.8	5.49	0.573	9.713	0.677	10.267	79.64
FS-158M-217	21.7	5.47	0.570	9.704	0.675	10.254	79.60
FS-158M-216	21.6	5.44	0.568	9.695	0.673	10.240	79.52
FS-158M-215	21.5	5.42	0.566	9.690	0.672	10.236	79.34
FS-158M-214	21.4	5.39	0.563	9.683	0.668	10.223	79.20
FS-158M-213	21.3	5.37	0.560	9.672	0.665	10.214	79.15
FS-158M-211	21.1	5.32	0.557	9.668	0.662	10.207	78.95
The Parameters are for reference only, which are subject to change without notice or obligation

Solar Cell Production Line

Cleaning & Texturing: Wafers are cleaned with industrial soaps and form square-based pyramids also called texture. The texturization helps to reduce the reflection of sunlight. 

Diffusion: Wafers that have been pre-droped with boron during the casting process are then given a negative(n-type) surface characteristic by diffusing them with a phosphorus source at high temperature, which in turn creats the negative/positive(n-p) junction.

Etching: Phosphorus diffuses not only into the desired wafer surface but also into the side and the opposite surface to form PN. This gives a shunt path between the cell front and rear. Removal of the path around the wafer edge/edge junction isolation is named etching.

PECVD: By PECVD equipment, the wafers are coated with anti-reflection coating(ARC). It's the blue silicion nitride film to reduce reflection and promote absorption of light.

Printing & Heating: it was adopted by printing paste with screen technology to print the electrodes of silicion solar, and form a good ohmic contact.
Testing & Sorting: It means classifying the cells according to their efficiency tested under the simulated sunlight.

Production process

 

Certifications