Product Description
100W Mono Solar panel
Specification
| Electrical Characteristic: |
| Module Type |
FSM-100W |
| Peak power |
100W |
| Optimum Operating Voltage(Vmp) |
36.00V |
| Optimum Operating Current(Imp) |
2.78A |
| Open-Circuit Voltage(Voc) |
43.60V |
| Short-Circuit Current(Isc) |
3.10A |
| Maximum system voltage |
DC1000V |
| Warranty |
10 years product defect warranty.
25 years power output warranty:
(90% in 10 years, 80% of 25 years) |
Temperature coefficients:Temperature range: -40 to 85°C
Isc: 0.1%/°C
Voc: -0.38%/°C
Pm: -0.47%/°C
Im: 0.1%/°C
Vm: 0.38%/°C
Surface maximum load capacity: 60m/s (200kg/m2)
Allowable hail load: steel ball fall down from 1m height
Weight per piece: 13kg
Output tolerance: ±5%
Frame (material, corners, and more): aluminum
Standard test conditions: 1000W/m³, AM 1.5, 25°C
Warranty: 2 years product warranty and 25 years 80% of power
FF: ≥73%
Ø Solar cell------conversion efficency of solar cells: 24%-17%, and ensures high performance and more power under same condition
Ø Front glass------3.2mm, high transmission, low iron, tempered glass,to enhanced stiffness and impact
resistance
Ø EVA------excellent anti-aging EVA , to enhance the rigidity and stability of solar cells
Ø TPT-------TPT hot seal made of flame resistance.
Ø Flame------is equipped with drainage holes in order to eliminate the risk that rain or snow water may accumulate in the frame
Ø Junction box------Ip65 rated, high quality, with diode protection
Ø Bypass diodes ------to avoid hot-spot effect.
Quality assurance testing of High efficiency MONO 36V 100w photovoltaic solar panels with CE IEC
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
){kind=link}